GET SX1 PRO 2T Guia Del Usuario página 13

1.
Remove the
protection caps and
connect the RESET
TPS cable (included
in the package) to the
"MAIN" connector of
the SX1 PRO 2T control
unit. As an alternative
to the RESET TPS
cable, you can use
the original Wake-up
connector supplied
with the motorcycle
by connecting it to the
diagnosis socket.
2 1
2.
Connect a fully
charged 12V battery to
the "RESET TPS" cable:
first the red wire to the
positive (+) pole and then
the black wire to the
negative (-) pole.
3.
Rotate the throttle
fully to the open
position and wait at
least 5 seconds. The
final positions of the
exhaust valve are
analyzed and saved -
the operation is clearly
Wait until
audible.
you no longer feel any 5 sec.
adjustment movement
coming from the motor.
EN
13