GET SX1 PRO 2T Guia Del Usuario página 2

ENGLISH
A. WARNINGS FOR CORRECT USE
Read all the instructions and warnings carefully before using GET
SX1 PRO ECUs. Failure to read and/or observe the instructions
and warnings can lead to incorrect use of the device or its
malfunction, resulting in product damage and personal injuries.
SX1 PRO KIT IS INTENDED ONLY AND EXCLUSIVELY
FOR RACING USE.
SAFETY PRECAUTIONS
1. Follow the instructions described in this manual to prevent
vehicle damage.
2. Do not modify or replace the material supplied by GET.
3. Always make sure that no installed part can interfere with
the hot parts of the engine, the steering components or with
the rider.
4. The product is not a toy. Keep it out of the reach of children
and/or animals as it contains small sized components that
could be swallowed.
5. Do not use the product for purposes other than those
specified in these instructions.
6. Do not use high pressure washers on the product.
IMPORTANT INFORMATION
1. Always make sure that SX1 PRO ECU is properly installed and
functional prior to use.
2. Never expose the device to temperatures above 70°C/158°F.
3. Install it when the engine is cold.
4. SX1 PRO ECU may not work properly if the OEM TPS sensor is
damaged or modified.
5. . The RPM limiter threshold of the SX1PRO maps is higher
than the standard ECU.
6. To make advanced level changes to the GET SX1 PRO 2T
injection map, it is necessary to use GET Maya programming
software (sold separately).
7. If the bike does not start or the engine is irregular, be sure that
EN
2