Dalbach KGK178-E Instrucciones De Uso página 31

Swapping door hinges
STEP-BY-STEP INSTRUCTIONS
1. Release the upper hinge and carefully lift the upper
appliance door and put it aside.
2. Loosen the middle angle bracket and then unscrew the
middle hinge.
3. Lift off the lower appliance door and place it safely to one
side.
4. Remove the pin from the bottom bracket and insert it
into the bracket on the opposite side.
5. Place the lower appliance door on the pin of the lower
bracket.
6. Close the appliance door carefully.
7. Fix the middle angle bracket and the middle hinge with
the two screws.
8. Insert the pin of the middle hinge at the top on the
fixture of the lower appliance door.
9. Place the upper appliance door on the pin of the middle
hinge.
10. Close the upper appliance door carefully. Make sure it is
aligned horizontally and vertically.
11. Release the pin from the upper hinge, turn the hinge
180° and reinsert the pin.
12. Take the upper hinge and insert the pin into the fixture of
the upper appliance door.
Page 31 of 48
Setting up and connecting
FIGURE