Publicidad
Idiomas disponibles
Idiomas disponibles
Putting into operation
11
Clean the appliance and the interior parts thoroughly before putting into operation (see
chapter Service and Maintenance).
11.1 Switch appliance ON/OFF
•
Connect the appliance to the mains power supply.
•
Check that the mains plug is firmly seated. Electrical connection, see type plate.
The appliance is ready for operation.
ATTENTION
APPLIANCE DAMAGE!
Do not switch on the appliance immediately after a power interruption. Possible overload
of the compressor or fuse blows.
Switching off the appliance
1. Remove the mains plug from the plug socket.
2. The appliance is switched off and no longer cools.
Temperature
•
The temperature depends on certain factors, such as the place of installation, how
often the appliance door is opened and closed or how the appliance is loaded.
•
With very high summer temperatures, set the temperature regulator to a higher
level to maintain the desired cooling temperature.
•
For optimum energy consumption, leave the glass shelves/drawers in the
appliance as shown (see Fig. Locating the coldest position in the refrigerating
compartment)
Set temperature
RECOMMENDED TEMPERATURE SETTING
AMBIENT TEMPERATURE
Warm
28° C - 38° C
Normal
22° C - 28° C
cold
16° C - 22° C
REFRIGERATING COMPARTMENT
Setting 1~ 3
Setting 3~ 4
Setting 4~ 5
Page 33 of 48
Putting into operation
Publicidad
