Harbor Breeze LP8300LAZ Manual De Instrucciones página 11

ASSEMBLY INSTRUCTIONS
WARNING
To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before
hanging.
Note: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice.
WARNING
The fan must hang with at least 7 ft. of clearance from the floor to blades.
15. Securely attach the hanger bracket (B) to the
outlet box (not included) using the outlet box
screws and washers supplied with the outlet
box.
WARNING
The outlet box must be securely anchored.
Hanger bracket (B) must seat firmly against
outlet box. If the outlet box is recessed, remove
wallboard until hanger bracket (B) contacts box.
If hanger bracket (B) and/or outlet box are not
securely attached, the fan could wobble or fall.
16. Carefully lift the fan assembly, resting the
hanger ball of the downrod assembly (C) on
the hanger bracket (B).
Note: Be sure the groove in the hanger ball
is lined up with tab on the hanger bracket (B).
WARNING
Failure to seat tab in groove could cause damage
to electrical wires and possible shock or fire
hazard.
To avoid possible shock, do not pinch wires
between the downrod assembly (C) and hanger
bracket (B).
15
B
16
11
Lowes.com/harborbreeze
B
C