Harbor Breeze LP8300LAZ Manual De Instrucciones página 9

ASSEMBLY INSTRUCTIONS
10. Route the black and white wires from motor
assembly (A) through the downrod.
11. Thread the downrod into downrod support of
motor assembly (A). Align the holes in the
downrod support of the motor assembly (A)
with the holes in the downrod and install the
clevis pin previously removed in Step 8, page
8. Secure clevis pin with hairpin clip also
removed in Step 8 Then, re-install screws
previously removed in Step 2, page 6 into
downrod support of motor assembly (A) to
secure downrod.
WARNING
It is critical the clevis pin in the downrod support
is properly installed and the screws are securely
tightened. Failure to do so could result in the fan
falling and causing injury.
12. Route motor coupling cover (F), canopy
screw cover (E) and ceiling canopy (D) over
fixture wires from motor assembly (A).
10
11
A
12
D
A
9
C
C
Lowes.com/harborbreeze
A
E
F