Harbor Breeze LP8300LAZ Manual De Instrucciones página 20

CARE AND MAINTENANCE
When cleaning, use only a soft brush or lint-free cloth to avoid scratching the finish.
Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.
Avoid using water, cleansers, or harsh rags, which can warp and ruin the finish.
WARNING
Do not use water when cleaning the ceiling fan. It could damage the motor or the finish and
create the possibility of electrical shock.
tight and secure.
TROUBLESHOOTING
WARNING
Turn off main power before attempting any troubleshooting.
PROBLEM
Fan will not start.
Fan sounds noisy.
POSSIBLE CAUSE
1. Fuse or circuit breaker blown.
2. Loose power line connections
to the fan.
3. Dead battery in remote control.
1. Blades not attached to fan.
2. Loose screws in motor housing.
3. Wire connectors inside housing are
rattling.
4. Motor noise caused by solid state
variable speed control.
A feather duster will work best.
CORRECTIVE ACTION
1. Check main and branch circuit
fuses or circuit breakers.
2. Check line wire connections to
fan.
3. Replace with new battery.
1. Attach blades to fan before
operating.
2. Check to make sure all screws
3. Check to make sure wire
4. Some fan motors are sensitive
20
in motor housing are snug
(do not overtighten).
connectors are secured tightly
inside housing.
to signals from solid-state
variable speed controls.
Solid-state controls are not
recommended; choose an
alternative control method.
Lowes.com/harborbreeze