Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
4. Remove motor coupler washer and upper
housing cover from motor assembly (A).
5. Position blade (H) through slot in motor
assembly (A) and over threaded posts so
they are showing. Note: Make sure the bottom
edge of the blade (H) is fully seated against
the flywheel of motor assembly (A).
6. Secure blade (H) to motor assembly (A) with
washers (BB) and screws (AA). Repeat Steps
5 and 6 for remaining blades (H).
Hardware Used
Screw
AA
BB
Washer
x 15
x 15
7
4
A
5
A
6
BB
Lowes.com/harborbreeze
H
AA
Publicidad
