Harbor Breeze LP8300LAZ Manual De Instrucciones página 13

WIRING INSTRUCTIONS
3. Slide the receiver unit from the power kit (J)
into the open end of the hanger bracket (B).
4. Connect green wires from hanger bracket (B)
and downrod assembly (C) to bare (ground) wire
from the outlet box using wire connector (CC).
Connect black wire from receiver unit from the
power kit (J) marked "AC IN L" to black supply
wire using wire connector (CC). Connect white
wire from receiver unit from the power kit (J )
marked "AC IN N" to white supply wire using wire
connector (CC). Connect white wire from
receiver unit from the power kit (J) marked "TO
MOTOR N" to white wire from fan using wire
connector supplied with power kit from the
power kit (J). Connect black wire from receiver
unit from the power kit (J) marked "TO MOTOR
L" to black wire from fan using wire connector
supplied with power kit (J).
Note: During wiring process, be careful not to
cut or bend black antenna.
WARNING
Check to see all connections are tight and no
bare wire is visible at the wire connectors
except for the ground wire.
Hardware Used
Wire
CC
Connector
x 3
13
3
4
BLK-ANT
Black White
CC
Black
Black
White
Receiver unit
Black to Motor
White
White to Motor
CC
Lowes.com/harborbreeze
Receiver unit
B
Green Wire
CC
(Ground)
Listed
Outlet Box
B
Green Wire
(Ground) from
C
Downrod
Assembly
Green Wire
(Ground) from
Hanger Bracket