JAC ECO+ 450 Traducción Del Manual De Uso Original página 7

Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
Additional maintenance for models with lubrication
The oil to be used is: 7940019 (as quoted in the JAC "spare parts" catalogue).
Or a food-grade liquid vegetable oil with a natural antioxidant.
Every 1,000 loaves or every 15 days, by a trained operator:
Add the dose of food-grade oil (100 to 150 ml) required to impregnate the felt pads on the loaf pusher
(operate the carriage advance button to enable access to the oil filler plug).
Every 25,000 loaves and/or at least once a year, by an approved agent:
Remove the plug from the socket.
Replace the loaf pusher felt pads.
8.3 Blade replacement.
(fig.12)
Always wear cut-resistant gloves (EN 388:2003 version B= 5) and safety footwear when replacing
blades or when working in the vicinity of blades.
Having ensured that the plug on your machine (fig.2, n°15) has been disconnected from the mains:
A. Remove the bagging paddle.
B. Unscrew the front table at the sides of the machine.
C. Remove the front table.
D. Unscrew the cover.
E. Open the cover that protects the blade holder frames. On the upper part of the front frame,
remove screws A, which secure the frame to the polypropylene strips (never remove the strips
from the frame, as you risk altering factory settings).
F. Lay the frame down forwards. Replace the blades on the rear frame (place something to
protect yourself on the front frame blades). Remove the locknuts on screws B (Misch
machines). Remove the locknuts on screws B (EPF – EPFS – EPM – EPN). Remove the
blade-tightening Allen screws B. Replace the blades, checking that they locate correctly in the
swing arm pins. Retighten the blades by tightening screws B, using the blades remaining on
the frame as a reference. Then tighten the nuts (machine fitted with lubrication option).
In order not to distort the frame and avoid the risk of dangerous breakages, only replace 1 to 3
blades at a time alternating from left to right.
Resume the procedure from point 6 for the front frame and refit the front frame and the cover
sections.
Connect your machine to the mains supply; it is now ready.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
13
English
9 CONSUMABLES
When ordering spare parts, check with your approved agent which part is required based on the
spare parts catalogue issued by the manufacturer.
Always quote the machine serial number shown on the nameplate.
Your agent will place the orders with JAC.
9.1 List of CONSUMABLES
ITEM CODE DESCRIPTION
7240032 BELT
5690012 SLIDE PAD, 140 MM
5690020 FRAME STRIP
6110001 JAC KNIFE, 13 MM/0.5 MM
6110011 JAC KNIFE, 13 MM/0.5 MM + TEFLON
6110019 JAC KNIFE, 13 MM/0.7 MM
5310026 LOAF HOLDER SPRING PLASTIC RING
5310030 LOAF HOLDER SPRING STAINLESS STEEL RING
5315013 GAS SPRING, 40 N
5690151 LOAF HOLDER PAD
5630012 RUBBER STOP, Ø 6 MM
5690102 JAC FLAP
6120002 LOAF PUSHER FELT PAD
4-04846 LOAF PUSHER FELT PAD
English
MODEL
ALL
ALL
ALL
ECO+ 450, ECO+ 450 BLOWER, FACE+ 450
ECO+ 450M, ECO+ 450M BLOWER, FACE+
450M
ECO+ 600 ECO+ 600M, ECO+ 600 BLOWER
ECO+ 450, ECO+ 450 BLOWER, ECO+ 600,
ECO+ 600 BLOWER, FACE+ 450
ECO+ 450M, ECO+ 450M BLOWER,
ECO+600M, FACE+ 450M
ALL
ALL
ALL
ALL
ECO+ 450M, ECO+ 450M BLOWER, FACE+
450M
ECO+ 600M
14