Publicidad
Idiomas disponibles
Idiomas disponibles
iSENSE TRACK ARC
The device is partly cooled using the supply air from the crossjet. If necessary, the device can be additionally
air-cooled or liquid-cooled via the media connections on the quick-release plate/cooling element.
5 Technical data
Tab. 1
Ambient temperature
Relative humidity
Tab. 2
Operating temperature
Relative humidity
Tab. 3
Field of vision
Depth of field
Nominal clearance distance
Horizontal pixel resolution
(at nominal distance)
Vertical pixel resolution
(at nominal distance)
Accuracy of the horizontal position
measurement
Accuracy of the vertical position
measurement
Sensor width
Sensor height
Sensor depth
Housing surface
Sensor head weight including
quick-release plate
Assembly
Sensor cooling via cooling element
Type of cooling
Cooling air flow rate
Cooling water flow rate
Crossjet supply
Recommendation for coolant
purity
Camera
Frame rate
Image sensor technology
Laser
Laser output
Number of measurement lines
Wavelength
Ambient conditions for transport and storage
Ambient conditions for operation
Technical data
140 mm (without connections, including spatter protector)
Coolant must comply with local regulations, be suitable for
use with aluminum, have a freezing point that is lower than the
−25°C to +70°C
(cooling derived, note the dew point)
Up to 95% (non-condensing)
−10°C to +55°C (note the dew point)
Up to 95% (non-condensing)
ARC 15
ARC 30
15 mm
30 mm
45 mm
55 mm
135 mm
135 mm
0.015 mm
0.03 mm
0.05 mm
0.05 mm
±0.05 mm
±0.1 mm
±0.1 mm
±0.1 mm
42 mm
67 mm (without quick-release plate/cooling element)
75 mm (including quick-release plate/cooling element)
Galvanized
700 g
Quick-release plate
Air or water cooling system
Max. 425 l/min
Max. 2 l/min
1 to 2 l/min (at max. 1 bar pressure)
temperature at the place of use and provide corrosion
protection
30 FPS (full image) to 100 FPS
CMOS
25 mW
Single line laser
650 to 699 nm
5 Technical data
ARC 50
50 mm
70 mm
150 mm
0.05 mm
0.09 mm
±0.15 mm
±0.15 mm
EN - 11
Publicidad
