Carrefour GD97760 Manual De Instrucciones página 162

fumes may be emitted that irritate the respiratory tract. Ensure fresh air and seek medical assistance
in the event of discomfort.
g) Do not use non-rechargeable battery. This could damage the appliance.
h) The recommended ambient temperature range for the charging system during charging is from 4ºC to
40 ºC.
i) The recommended ambient temperature range for tool and battery storage is from 0ºC to 50 ºC.
j) The recommended ambient temperature range for tool and battery use is from -5ºC to 50 ºC.
k) Remove the battery from the device before storage.
l) Electrolyte leaking from the cells can cause damage to the skin, clothes or any other items exposed to
it. If the electrolyte contacts the skin or clothes, wash thoroughly with clean water. If the electrolyte
enters into the eyes, do not rub the eyes but flush them immediately with copious amounts of clean
water such as tap water, and immediately consult a doctor.
m) Do not disassemble or modify the battery, which can cause short-circuiting between cells or between
the cell and its wiring, and disables the battery's safety protection system. These can lead to
electrolyte leakage, overheating or a cell or battery, bursting and fire.
n) Avoid casual or inadvertent shorting of a battery with metallic objects such as: wire, tools, neckless
or hairpins, which can cause short-circuiting, which cause excess current flow, electrolyte leakage,
heating of cells or batteries, bursting and fire.
o) Keep battery away from a fire or heat. The insulation materials will melt and the gas release vent and
protection system will be damaged, causing electrolyte leakage, bursting and possibly fire.
p) Not allow the battery to contact with water or gets wet, it may short-circuit, overheat, rust or lose its
functions.
q) Do not expose the battery to mechanical shock, for example, by dropping, throwing or crushing,
causing electrolyte leakage, cell and battery heating, bursting and fire.
r) Avoid the battery to directly connect to electric source such as a car lighter socket, or car battery,
which may cause excess current to flow at high voltage and can cause electrolyte leakage,
overheating of a cell or battery, bursting and fire.
VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and
low noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
 Only use the product as intended by its design and these instructions.
 Ensure that the product is in good condition and well maintained.
 Use correct attachments for the product and ensure they are in good condition.
 Keep tight grip on the handles surface.
 Plan your work schedule to spread any high vibration tool use across a longer period of time.
RESIDUAL RISK
Even if properly operating and handling this product in accordance with all the safety requirements,
potential risks of injury and damage remain. Due to its construction and build, this tool may present the
following hazards:
a) Cuts
b) Ear damage if working without ear protection
c) Damage to your health caused by swinging your hands and arms when operating the tool for longer
periods of time or if the tool is not held or maintained properly.
Warning! During operating, the product generates an electromagnetic field which, under certain
circumstances, may impair the functionality of active or passive medical implants. To reduce the risk of
serious or lethal injuries, we recommend that persons with medical implants consult their doctor and
the manufacturer of their medical implant before operating the electric tool.
162