QJMOTOR SRT 700 Manual Del Usuario página 18

Warning
When changing lanes or turning, turn on the turn
signals in advance and confirm that no vehicles
are passing behind. After changing lanes or turn-
ing, turn off the turn signal lights in time to avoid
affecting the normal driving of other vehicles and
avoid accidents.
5 Overtaking light switch
When meeting with a vehicle or overtaking, press
this button continuously, the headlight high beam
will flash continuously to warning the vehicle ahead.
Right handle
1Flameout switch
When the switch is pressed in the "
whole vehicle circuit is connected, and the engine
can be started.
When the switch is pressed in
the " " position, the whole
vehicle circuit is cut off and the
engine cannot be started.
Warning
The flameout switch on the handle is used to turn
off the flame in an emergency. Please do not turn
off the flame when sliding, otherwise oil and gas
will enter the exhaust pipe, which will cause high
temperature combustion of the catalyst part and
damage the exhaust muffler.
2 Light switch(IF EQUIPPED)
Turn the switch to the "
front position light, rear position light and license
plate light will light up; When turn the switch to the
" " position, front position light, rear position light
and license plate light will light up; Turn to the right-
most position, the lights are off, which often used for
daytime riding.
" position, the
When the switch is moved to the " " position, the
left and right turn signal lamps stop flashing.
②Hazard warning lamps switch
When the switch is moved to the "
left and right turn signal lamps will be flashing and
illuminating simultaneously, reminding you to alert
danger.
13
" position, the headlight,
" position, the