Publicidad
Idiomas disponibles
Idiomas disponibles
Warning
When changing lanes or turning, turn on your turn
signal lamp and make sure there is no vehicle behind
you. After changing lanes or turning, turn off the turn
signal lamp in time to avoid affecting the normal
running of other vehicles and avoid accidents.
④ Horn button
Press the horn button and the horn will sound.
⑤ Overtaking switch
When
rendezvousing
with
overtaking, press this button continuously, the
headlight will flash continuously to warn the vehicle
ahead.
⑥ Clutch handle regulator
The position of the clutch lever can be adjusted by
adjusting the position of the knob via the ring nut as
required for operating comfort. Adjust one of the four
optional positions. Just move the clutch handle
horizontally forward slightly, and then rotate the ring
nut adjuster to align with the arrow
required position. The clutch
handle in position 1 is the
farthest from the grip, and
the clutch handle in position
4 is the closest to the grip.
● Right handle
① Start/stop switch
other
vehicle
or
Turn the switch to "
motorcycle circuit is
turned on, and the
engine can be
started.
When the switch is turned to the "
circuit of the whole vehicle is cut off and the engine
cannot be started.
18
" position: The
to adjust the
A
Front
" position, the
Publicidad
