Warning
When you want to change the driveway or turn,
turn on the steering lights in advance and make
sure there is no rear vehicle passing through. After
switching lanes or turning, turn off the steering sig-
nal lights in time so as not to affect the normal driv-
ing of other vehicles and avoid accidents.
5 Overtaking lamp switch
Press this button continuously during rendezvous or
overtake with the vehicle, and the headlights will
shine continuously to warn the vehicle ahead.
6 Instrument adjustment button, "instrument
adjustment button".
Right handle
1 Starting / Flameout switch
Switch to "
" position, the
whole vehicle circuit is turned
on, the engine can start.
Switch to "
" position, the
whole vehicle circuit is cut
off, the engine cannot start.
2 Hazard light switch
"
" Mark: When the light switch button is in the
"
" marked position, the left and right turn signal
lights flash and blink at the same time, warning of
danger.
" " Mark: When the hazard light switch button is in
the " " marked position, the left and right steering
lights stop flashing.
3 Electric starter button
Press the electric starter button, the electric motor
turns, starting the engine.
4 Throttle control grip
Throttle control grip is used to control the speed of
the engine. When you want to accelerate, turn the
handle in your own direction, while turning in the
opposite direction slows down.
5 Front brake handle
Hold the brake handle of the right handle slowly
when braking.
6 Front brake handle regulator
According to the need of oper-
ating comfort, the position of
the front brake handle can be
adjusted by adjusting the knob
position by the ring nut. Adjust
12