QJMOTOR SRK 400 Manual Del Usuario página 16

Indicates how much oil is stored in the tank. When
filling up the fuel, it shows 6 fuel levels, the number
of oil bits close to E means less fuel; and the num-
ber of oil bits close to F indicates that there is a lot of
fuel. When the fuel is insufficient, the fuel level is 1
grid or less than 1 grid, the last grid will flicker; and
the fuel alarm light will be lit.
0 Neutral indicator
When the transmission is in a neutral position, the
neutral indicator lights up.
A Engine failure indicator
When the key starts, the indicator lights on and the
oil pump works for 3 seconds, the motorcycle starts.
If the indicator light goes out after the motorcycle
starts, the vehicle is normal and there is no fault; if
the indicator light is on, there will be a fault. Also in
the course of driving, if the indicator light is off the
vehicle runs normally, if the indicator light is on, the
vehicle needs to stop and check, please contact the
motorcycle distribution department or maintenance
center to check the vehicle in time.
B Fuel alarm lamp
When the fuel quantity of the vehicle is insufficient,
the fuel alarm light will be lit, and when there is no
oil, it will flicker and light up.
C Odometer
Depending on your needs, you can choose the
small mileage (TRIP 1 or TRIP 2) or total mileage
(TOTAL) feature on the odometer.
Small mileage (TRIP 1 or TRIP 2): a mileage meter
that can be cleared and records the range mileage
for a certain period of time.
Total mileage (TOTAL): records all mileage that has
been driven, optional in kilometers (km) or miles
(m), see "instrument adjustment button".
D Time display
Displays the current time. If you need to adjust the
time, see "instrument adjustment button".
E Speedometer
The speedometer indicates the current speed of the
vehicle. The optional unit is kilometer / hour (km/h) or
mile / hour (mph), see "instrument adjustment button".
F Instrument adjusting button
The instrument adjustment button is
located on the right handle switch of
the motorcycle. In the main display
interface of the instrument, briefly
press the "select" selection button to
switch between total mileage and rel-
ative mileage (trip a, trip b). In the
11