QJMOTOR SRK 400 Manual Del Usuario página 39

cial clamp pliers 1 are required to reinstall the hoop 2
otherwise, the hoop may not be assembled properly,
and cause the motorcycle to malfunction.
Fuel injector and fuel line
There is one port on the fuel
pump 1,The fuel will enter the
fuel injector 3 from one of the
ports of fuel pump through the
fuel filter 2, and finally oil and
gas will be injected into the
inlet pipe of engine.
For the connection method of
the oil inlet and return pipes,
please connect as shown on the right.
Part lubrication
Proper lubrication is very import-
ant to maintain the normal oper-
ation of motorcycle parts and
components, extend their ser-
vice life and drive safe. After rid-
ing for a long time or after the
motorcycle rained or washed,
we recommend that you per-
form a lubrication maintenance
on the motorcycle. The main points of specific lubrica-
tion and maintenance are shown in the figure below:
NO.
1
2
3
4
5
6
5
4
7
1
6
The above lubrication items marked with "" should
be operated by professional service technicians of
the maintenance department of QJMOTOR dealer.
7 2 3
34
Description
Rear brake pedal shaft
Side stand joint and
spring hook
Shift pedal hinge pin
Throttle cable
Front brake lever
hinge pin
Clutch lever (hinge
pin)
Speedometer gear and

gear shaft bearing
Notice
Oil Type
(M: Motorcycle
lubricating oil
G: Grease)
G
G
G
M
G
M
G