V2 12A042 Manual Del Usuario página 32

6.14 - ELECTRIC CONNECTIONS
L1 Antenna
L2 Antenna shield
L3
Opening control for the connection of control
devices with N.O. contact
L4 Opening controls for pedestrian access for the
connection of control devices with N.O. contact
L5 Stop command. N.C. contact
L6 Common (-)
L7
Photocells type 1. N.C. contact
L8
Photocells type 2. N.C. contact
L9 Safety ribbons type 1 (fixed). N.C. contact
L10 Safety ribbons type 2 (mobile). N.C. contact
L11 Common (-)
K1 Open limit switch motor 1
K2
Close limit switch motor 1
K3
Open limit switch motor 2
K4 Close limit switch motor 2
K5 Common (-)
K6 Power output +24Vdc for photocells and other
accessories
K7 Common for accessories power supply
K8 Photocell/optical edge TX power supply for
functional test
K9 - K10 LOCK 12V
L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 Z1 Z2 Z3 Z4 Z5 Z6
Z1 - Z2
Z3
Z4
Z5
Z6
B1 - B2
POW+
POW-
BAT+
BAT-
L
N
Encoder
motor 2
RECEIVER
ADI
Encoder
motor 1
OVERLOAD
MAINS
F1
- 30 -
Low voltage light (24V)
Motor 1 (OPENING)
Motor 1 (CLOSING)
Motor 2 (OPENING)
Motor 2 (CLOSING)
230VAC courtesy light or flashing light
+24V power supply
Power supply (-)
+ pole of the optional battery pack (code 161212)
or the ECO-LOGIC battery box
- pole of the optional battery pack (code 161212) or
the ECO-LOGIC battery box
Power phase 230V/120V
Neutral 230V/120V
Plug in receiver
ADI interface
It shows that there is an overload on accessories
power supply
It shows that the control unit is power supplied
2,5A
M1 M2
B1 B2