ENAR ZEN-L 12 Manual De Operación página 36

1 INTRODUCTION
Thank you for trusting the ENAR brand.
For the maximum performance of the equipment, we recommend read carefully the safety recommendations,
maintenance, and usage listed in this manual.
Defective parts should be replaced immediately to avoid major problems.
The effective longevity of the equipment will increase if the manual instructions are followed.
We will glad to help you with any comments or suggestions in reference to our equipment.
SAVE THESE INSTRUCTIONS—This manual contains important instructions for the machine models listed
below. These instructions must be followed during installation and maintenance of the machine (and battery,
if equipped).
Machines
covered in
this manual
en
Machine
identification
Serial number
(S/N)
2 ZEN-L
Machine Item Number
ZEN-L 12 5100072720
ZEN-L 12W 5100072719
ZEN-L 15 5100072722
ZEN-L 15W 5100072721
ZEN-L 20 5100072724
ZEN-L 20W 5100072723
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.
Serial Number:
VIBRATORY PLATE