Descargar Imprimir esta página

ENAR ZEN-L 12 Manual De Operación página 55

Publicidad

Idiomas disponibles

Idiomas disponibles

6.4 SERVICING THE AIR CLEANER
Background
Procedure
VIBRATORY PLATE
A dirty air filter element can restrict air flowing into the carburetor. To keep the carburetor
in good working conditions, please service the air cleaner periodically. If operating the
engine in extremely dust area, the job should be done more often.
WARNING:
Explosion hazard and fire hazard.
Do not clean the air filter element with gasoline or low-flash point detergents.
NOTICE: Do not run the engine without an air filter element, doing so will damage the
engine.
Perform the procedure below to service the air cleaner.
1.
Remove air cleaner cover (a). Remove both elements and inspect them for holes
or tears. Replace damaged elements.
2.
Wash foam element (b) in solution of mild detergent and warm water. Rinse
thoroughly in clean water. Allow element to dry thoroughly. Soak element in clean
engine oil and squeeze out excess oil.
3.
Tap paper element (c) lightly to remove excess dirt. Replace paper element if it
appears heavily soiled.
en
ZEN-L
21

Publicidad

loading