ENAR ZEN-L 12 Manual De Operación página 53

6 MAINTENANCE
6.1 MAINTAINING THE EMISSION CONTROL SYSTEM
6.2 PERIODIC MAINTENANCE SCHEDULE
Check the fuel level.
Check the engine oil level
Inspect the fuel lines
Inspect the air filter. Replace
as needed
Clean the air cleaner
element
Change the engine oil
Clean the engine cooling
fins
Clean the sediment cup or
fuel filter.
Check and clean the spark
plug.
Check and adjust the valve
clearance.
Check the external
hardware.
Check and adjust the drive
belts
Inspect the shockmounts for
damage.
Replace the shockmounts
as needed.
Change the exciter oil
VIBRATORY PLATE
Normal maintenance, replacement, or repair of emission control devices and systems may
be performed by any repair establishments or individual; however, warranty repairs must
be performed by a dealer service center authorized by ENAR. The use of service parts that
are not equivalent in performance and durability by authorized parts may impair the
effectiveness of the emission control system and may have a bearing on the outcome of a
warranty.
Engine Maintenance
The chart below lists basic engine maintenance. Refer to the engine manufacturer's Operation
manual additional information.
Daily
before
starting
•
•
•
•
Machine Maintenance
The chart below lists basic machine maintenance.
Daily
before
starting
•
After first Every 50hr
20hr or 1 or
month 3 months
•
•
After first Every 50hr
20hr or 1 or
month 3 months
•
•
Every 100hr Every 300hr
or 6 months or 1 year
•
•
•
•
•
Every 100hr Every 300hr
or 6 months or 1 year
•
•
ZEN-L
en
19