ENAR ZEN-L 12 Manual De Operación página 60

6.9 CLEANING THE PLATE
6.10 STORAGE
Procedure
en
26 ZEN-L
Clean the plate after use to remove dirt, stones, and mud caught under the engine console.
If the plate is being used in a dusty area, check the engine cylinder cooling fins for heavy
dirt accumulation. Keep the engine cylinder fins clean to prevent it from overheating.
If the plate is being stored for more than 30 days.
1. Remove loose stones and dirt from the plate.
2. Clean the engine cylinder cooling fins.
3. Clean or replace the air filter.
4. Change the exciter oil.
5. Change the engine oil and follow the procedures described in engine manual for
engine storage.
6. Cover the plate and engine and store in a clean, dry area.
VIBRATORY PLATE