Publicidad
Idiomas disponibles
Idiomas disponibles
5
OPERATION
5.1 PREPARING THE MACHINE FOR FIRST USE
Procedure
Result
5.2 HANDLE ASSEMBLY
Procedure
VIBRATORY PLATE
Perform the following procedure to prepare the machine.
1.
Make sure all loose packaging materials have been removed from the machine.
2.
Check the machine and its components for damage. If there is visible damage, do
not operate the machine! Contact your ENAR dealer immediately for assistance.
3.
Take inventory of all items included with the machine and verify that all loose
components and fasteners are accounted for.
4.
Attach component parts not already attached.
5.
Add fluids as needed and applicable, including fuel, engine oil, and battery acid.
6.
Move the machine to its operating location.
The vibroplate is now ready to use.
Perform the procedure below to prepare and assemble the handle to machine.
1.
Align the control handle (a) on the provided bores of the machine.
2.
Tighten the control handle on the left and right with screw (b) at 47 Nm torque.
en
ZEN-L
15
Publicidad
