ENAR ZEN-L 12 Manual De Operación página 50

5.3 RECOMMENDED FUEL
Use of
oxygenated
fuels
Ethanol
5.4 APPLICATION
en
Overview
5.5 BEFORE STARTING THE MACHINE
Remember
Check
16 ZEN-L
The engine requires regular grade unleaded gasoline. Use only fresh, clean gasoline.
Gasoline containing water or dirt will damage the fuel system. Consult the engine owner's
manual for complete fuel specifications.
Some conventional gasolines are blended with alcohol. These gasolines are collectively
referred to as oxygenated fuels. If you use an oxygenated fuel, be sure it is unleaded and
meets the minimum octane rating requirement.
Before using an oxygenated fuel, confirm the fuel's contents. Some states and provinces
require this information to be posted on the fuel machine.
The following is the ENAR approved percentage of oxygenates:
(Ethyl or grain alcohol) 10% by volume. You may use gasoline containing up to 10%
ethanol by volume (commonly referred to as E10). Gasoline containing more than 10%
ethanol (such as E15, or E85) may notbe used because it could damage the engine.
If you notice any undesirable operating symptoms, try another service station, or switch to
another brand of gasoline.
Fuel system damage or performance problems resulting from the use of an oxygenated
fuel containing more than the percentages of oxygenates above are not covered under
warranty.
This plate is designed for compacting loose, granular soils, gravel, and paving stones. It
is intended to be used in confined areas and areas next to structures such as walls, curbs,
and foundations. Plates equipped with water tanks can be used for compacting asphalt.
This plate is not recommended for compacting cohesive soils with a heavy clay content.
For cohesive soil, use a vibratory rammer or sheepsfoot roller.
Read and understand the safety and operating instructions at the beginning of this manual.
•
Oil level in the engine
•
Fuel level
•
Condition of the air cleaner
•
Tightness of the external fasteners
•
Condition of the fuel lines
VIBRATORY PLATE