ENAR ZEN-L 12 Manual De Operación página 56

6.5 CHANGING THE ENGINE OIL
Procedure
en
22 ZEN-L
Perform the procedure below to change the engine oil.
1. Drain the oil while the engine is still warm.
2. Remove the oil filter plug (a) and the drain plug (b) to drain the oil.
Note: In the interest of environmental protection, place a plastic sheet and a container
under the machine to collect any liquid that drains off. Dispose of this liquid in accordance
with environmental protection legislation.
3. Install the drain plug.
4. Fill the engine crankcase with the recommended oil up to the level of the lug opening
(c). See chapter Technical Data for oil quantity and type.
5. Install the oil filler plug.
VIBRATORY PLATE