ENAR ZEN-L 12 Manual De Operación página 48

4 LIFTING AND TRANSPORTING
Lifting the
Machine
en
Transporting
the Machine
14 ZEN-L
This machine is heavy enough to cause injury if proper lifting techniques are not used.
Observe the following guidelines when lifting the machine.
•
Do not attempt to lift the machine unassisted. Use appropriate lifting equipment
such as slings, chains hooks, ramps or jacks.
•
Make sure lifting equipment is attached securely and has enough weight- bearing
capacity to lift or hold the machine safely.
•
Remain aware of the location of other people nearby when lifting the machine
WARNING
When hoisting a plate, it will tilt slightly, therefore begin hoisting operation smoothly
preventing oscillations.
Observe the following guidelines when transporting the machine to and from the job site.
•
Drain the fuel tank before transporting the machine.
•
Ensure that the machine is securely strapped down in the transport vehicle to
prevent it from sliding or tipping.
Tie-down points:
•
Do not refuel the machine in or on the transport vehicle. Move the machine to its
operating location and then fill the fuel tank.
.
VIBRATORY PLATE