SWM SILVER VASE Manual Uso Y Mantenimiento página 143

- Disconnect the right and left direction indicators
disconnecting the related wires (7) and (8) from
the vehicle wiring:
• Left wiring direction indicator (7) Orange wire
and Green wire.
• Right wiring direction indicator (8) Light Blue
wire and Green wire.
7
- Unscrew the nuts (9) and remove the direction
indicators (10) from both sides by extracting the
related wiring.
9
TWO SEATER SEAT ASSEMBLY
- Assemble the fitted passenger bar (1), tightening
the screws on each side (2) "C" and the screws (3)
"C" with the related nuts "D".
Tighten the screws with a 25 Nm, 2,5 kgm, 18,43
ft/lb tightening torque.
8
10
1
3
C + D
- Assemble the right and left direction indicators (4)
on the bar (1), tightening the related nuts previ-
ously removed.
Note*: Pay attention not to reverse the direction
indicators (4) since in the reflective lower part (5)
there's an exhaust hole.
1
4
10
C
2
4
5
EN - 67