tormek T-1 Manual Del Usuario página 3

Original instructions
Safety
Automatic overheat protection
The Tormek T-1 has a recommended maximum operating time of 30 minutes per hour. The
motor has an automatic overheat protection system that will shut off the motor if it reaches a
certain temperature. Note: If the motor shuts off, always turn off the machine by pressing
the power button as the motor will resume operation once it cools down.
General information
• Read all instructions carefully before using the machine.
• To protect against risk of electrical shock do not expose the machine to rain and do
not use in damp environments. Do not put the machine in water or other liquids.
• This appliance is not intended for use by children or by persons with reduced
physical, sensory, mental capabilities, or lack of experience and knowledge. Close
supervision is necessary when any appliance is used near children. Children should
not play with the appliance.
• Turn the appliance OFF, then unplug from the outlet when not in use. Always unplug
the appliance before assembling or disassembling parts and before cleaning. To
unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
• Avoid contacting moving parts.
• Do not operate any appliance with a damaged cord or plug, after the appliance
malfunctions, or after the appliance is dropped or damaged in any manner. Please
contact your local dealer or Tormek's customer support (support@tormek.se) for
information on examination, repair, or adjustment.
• The use of attachments not recommended or sold by Tormek may cause fire, electric
shock or injury.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table or counter.
• Do not let the cord contact hot surfaces, including a stove.
• Carefully route the power supply cord to avoid damage from the knife blade while
sharpening.
• SAVE THESE INSTRUCTIONS
Sharpening and honing
• The Tormek T-1 is only intended for sharpening and honing kitchen knives. Only use
the machine for its intended purpose. Follow the instructions.
• Tormek's accessories are specially made for Tormek machines and must not be used
on any other grinding machine.
EN
3