tormek T-1 Manual Del Usuario página 5

Instructions on grounding
• In the event of faults or open circuits, grounding reduces the risk of electric shock by
diverting the current. This machine is equipped with a grounded cable and plug. The
plug must be connected to a matching electrical socket installed and grounded in
accordance with applicable laws and regulations.
• Do not modify the original plug – if it does not plug into the electrical socket, contact
an authorized electrician to install a suitable electrical socket.
• Incorrect connection of the grounded plug may result in electric shock. The insulated
ground cable is green, with or without yellow stripes.
• Check with an authorized electrician or service personnel if you have not fully
understood the instructions, or if you are doubtful that the machine is properly
grounded.
• Only use an extension cable with a grounded plug and grounded electrical sockets
that the machine's plug fits into.
• Repair or replace a damaged or worn cable immediately.
After work
• Always turn the machine off and unplug the machine. Never unplug the machine
when the machine is running/switched on.
• Store the machine in a locked area and out of reach of children and unauthorized
personnel.
Marking plate for Tormek T-1
MODEL: T-1
ARTICLE NO: T-1 ALO/EUR
SERIAL NO:
DATE:
Made in Sweden by Tormek AB
www.tormek.com
220-240 V, 50-60 Hz, 120 W
HOUSEHOLD TYPE
Spare parts and repairs
This machine meets applicable safety standards. Repairs must be performed by qualified
personnel using genuine spare parts. Incorrectly performed repairs may cause serious
injury to the user.
MODEL: T-1 US
ARTICLE NO: T-1 ALO/NA
SERIAL NO:
DATE:
Made in Sweden by Tormek AB
www.tormek.com
100-115 V, 50-60 Hz, 60 W
CONFORMS TO
UL STD. 982
CERTIFIED TO
CSA STD. E60335-2-14
& C22.2 NO 60335-1
3 1 9 6 2 2 1
HOUSEHOLD TYPE
EN
5