Rocket BOXER Manual De Uso Y Mantenimiento página 43

4.1 Connections to be provided
by the user
Connections must be carried out
by qualified personnel in full
accordance with federal, state
and local regulations.
MAINTENANCE
1. Water drainage pipe (1 - Fig. 4.3), hav-
ing an internal diameter of min. 30mm,
equipped with a water-trap accessible for
inspection.
2. Water supply pipe (2), with a 3/8"G cut-off
tap.
3. Circuit breaker (3)
4. Water softener (Optional-4)
i
MACHINE
UNDER
MACHINE
UNDER
MAINTENANCE
fig_4.3
BOXER
4.2 Water supply
Make sure that the maximum
supply pressure of water does
not exceed 6.5 bar; otherwise,
install a pressure reducer.
Connections must be installed close to the
i
machine.
Water supply pipe, with a 3/8"G cut-off tap (2
- fig._4.3). Connect the flexible hose supplied
to the machine fitting (1 - fig._4.4), which can
be reached directly from underneath the ma-
chine or from above, after removing the grid
and the tray.
fig_4.4
Water supplies to the machine
must be suitable for consump-
tion by man and for human uses,
in compliance with all the laws in
force in the installation site.
The installation technician is required to get
confirmation from the final owner and/or user
of the system that the water meets all the
foregoing requirements.
For machine installation it is necessary to
use all the components and/or parts supplied
on issue with the machine. Should it ever be
necessary to use other parts and/or compo-
nents, the installation technician is required to
EN
43