EN
verify that said other parts and/or components
are suitable for contact with water for human
consumption/drinking water. The technician
in charge of installation is required to perform
all the hydraulic connections so that they are
totally compliant to all the related rules, regula-
tions and provisions in force in the installation
site on hygiene, hydraulic system safety and
environmental protection.
MAINTENANCE
The machine has to operate with clean
soft drinking water. Never attempt to run
the machine with water of hardness other
than that specified in the paragraph 3.5.
The manufacturer recommends use of an
in line filter
4.3
Water drain
Check the efficiency of the machine's water
drain. Drain tray is located under the drip tray.
(1 - fig._4.5)
Underneath the tray, there is a hose connec-
tor (2 - fig._4.5) to which a pipe to drain the
remaining water is connected.
fig_4.5
44
i
MACHINE
UNDER
BOXER
4.4
Electric supply
Before connecting the machine
ensure that the type label details
comply with those of the electric
distribution network.
The electrical connection cable must be di-
rectly connected to the connection provided
according to current legislation.
The machines can have a three-phase
power supply using a 5-conductor cable (3
phases + neutral + earth).(fig._4.6). (see
chap. 3.2 Technical specifications)
The electrical connection cable must be di-
rectly connected to the connection required
according to current legislation. Ensure that
the earthing system is efficient and in compli-
ance with current legal requirements.
fig_4.6