Rocket BOXER Manual De Uso Y Mantenimiento página 45

It is necessary to provide a circuit breaker at
the start of the power cable, complete with
magnetic release elements in accordance with
the type label details. The contact opening
must be at least 3 mm.
WARNING:
Should the power supply cable
be damaged it is to be replaced
by the manufacturer or by its
technical assistance service or
by person with equivalent quali-
fication, in order to prevent any
risks.
BOXER
5
- START UP
We assume the machine has been properly
installed.
Open the water tap and switch on the main
electrical switch (both not included to delivery)
Turn the switch-on / switch-off / water heating
knob (1 - fig._B) from position "O" to position
"I".
The indicators (2 and 4 - fig._5.1) turn on.
Wait for the indicator (4 - fig._5.1 ) to turn off
and the indicator (3- fig._5.1) to turn on. At this
point the boiler is full of water.
fig_5.1
Turn the switch-on / switch-off / water heating
knob (1 - fig._5.1) from position "I" to position
"II" to activate the heating element in the boiler
and heat the water.
Wait till the boiler pressure has reached the
working pressure (0.9 bar approx). You can
read the boiler pressure on the boiler pres-
sure scale (0-3 Bar) of the pressure gauge
(5 - fig._5.1).
Allow 20 to 25 minutes warm up time.
EN
45