Auchan 600138148 Manual Del Usuario página 30

6. CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power plug.
6.1 CLEANING
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
7. TECHNICAL DATA
Model no.
Rated voltage
No load speed
Torque positions
Max. drill capacity steel
Charger
Battery
Charger time
Max. torque
Chuck type
Acoustic pressure level LpA
Acoustic power level LwA
Vibration
Noise emission values measured according to relevant standard.
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
Information:
- The declared vibration total value(s) and the declared noise emission value(s) have been measured in
accordance with a standard test method and may be used for comparing one tool with another;
- The declared vibration total value(s) and the declared noise emission value(s) may also be used in a
preliminary assessment of exposure.
Warning:
- -The vibration and noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of workpiece is processed;
and
- Need to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to the trigger time).
600138148(MAPP18V2AC)
20V d.c.
0-400/0-1400min
-1
18+1+1
Ø10mm
600138148(MAPP18V2AC)
Input: 100-240~,50-60Hz, 0.2A, output: 21.5V d.c., 0.3A
600138148(MAPP18V2AC)
20V d.c.,2000 mAh with 5 Li-ion cells
3-5 hour
40 Nm
Keyless chuck
87.6 dB(A), K=5dB(A)
98.6dB(A), K=5dB(A)
ah,iD= 11,505 m/s²； K=1,5 m/s²
ah,D= 1,298 m/s²； K=1,5 m/s²
30