3.2 Reasonably foreseeable misuse
MiniFil device must not be operated in industries that require compliance with the
requirements for explosion protection. The device must also not be used in the
following cases:
for processes that do not comply with its intended purpose according on the above
mentioned data and where the intake air:
contains sparks, e.g. from grinding, which may, depending on size and quantity,
damage the suction hose and result in fire of the filter media;
contains liquid, which lead to the pollution of air stream with vapour containing
aerosols and oils;
contains easily flammable, combustible dust and/or substances which may form
explosive mixtures or atmosphere;
contains other aggressive or abrasive dust that damages the MiniFil device and
embedded filter elements;
contains organic, toxic substances/ingredients that are released during material
parting.
Waste products, such as separated particles, may contain harmful substances.
-
Thus they shall not be disposed at municipal landfills - they shall be disposed in
an environmentally friendly manner.
-
Filtration components - filters from other manufacturers, which are not approved
by Kemper GmbH as spare parts, may not be used because the end result of
filtration is unknown;
-
Site of operation outdoors, where the filtration device is exposed to the effects of
the climate - the device may only be installed indoors in closed buildings;
-
Lifting equipment such as fork lifts, manual lifting systems, which are unsuitable
for filtration unit transport. Maximum loading capacity must be observed.
When used in compliance with its intended purpose, the MiniFil device is not
associated with foreseeable misuse, which could lead to dangerous situations,
resulting in damage to health.
- 47 –
Technical changes and errors reserved.
KEMPER MiniFil Instruction Manual - EN