Declaration Of Conformity - Kemper MiniFil Instrucciones De Uso

Ocultar thumbs Ver también para MiniFil:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 132

8.3 Declaration of Conformity

Within the meaning of Directive 2006/42/EC on Machinery
Manufacturer:
Mr. Manfred Könning is authorized to compile the technical documents.
We hereby declare that the following machine is in conformity with the relevant provisions of
European Directive 2006/42/EC on machinery.
Serial No.
Designation:
This machine is also in accordance with the relevant provisions of the following EC Directives:
2006/42/ES
2004/108/ES
2006/95/ES
93/68/EHS
The following harmonized standards (or parts thereof) were applied:
DIN EN ISO 13857
EN 13850
EN 12100
EN 60204 -1
EMVG
EN 610000-6 part 4
EN 610000-6 part 2
The following technical specifications (or parts of these standards) were applied:
VDE 0100-510
-
VDE 0113
1
UVV BGV A1
DIN 45635-38
Annex No. VIII to the Directive 2006/42/EC was observed. Compliance with the requirements under the
Directive on electrical equipment designed for use within certain voltage limits was ensured according to Annex I,
No. 1.5.1 of Directive 2006/42/EC.
Additional information:
Declaration of Conformity expires in the event of use contrary to the intended purpose or in the event of
implementation of structural changes that have not been confirmed by us as the manufacturer.
Vreden, 15. 01. 2014
KEMPER GmbH
Dipl.-Ing. M. Könning
(Head of Technical Department)
KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
65 150 (in case of different serial number in different versions
of the device)
KEMPER MiniFil
Directive on Machinery
Electromagnetic Compatibility
Directive on Electrical Equipment Designed for Use within
Certain Voltage Limits
Directive on the Use of the CE Conformity Marking
Safety of Machinery - Safe Distances for Elimination of Reach
into Hazardous Spaces with Upper and Lower Limbs
Safety of Machinery
Safety of Machinery - Principles for Risk Assessment
Electrical Equipment of Machines
The Act on Electromagnetic Compatibility of Machinery
Basic Professional Standards for Emitted Interference
Basic Professional Standards for Interference Resistance
Establishment of Low Voltage Equipment
Electrical Equipment of Machines - Glossary to
Standard EN 60204-1
Accident Prevention Regulation: Principles of Prevention
Noise Measurement on Machinery
- 66 –
Technical changes and errors reserved.
KEMPER MiniFil Instruction Manual - EN

Publicidad

Tabla de contenido
loading

Tabla de contenido