Residual Risk - Kemper MiniFil Instrucciones De Uso

3.4 Residual risk

Even in compliance with all safety provisions the operation of the MiniFil device is
associated with the below-described residual risk.
All persons handling with the MiniFil device must be aware of residual risk and follow
the instructions to prevent accidents or damage as a result of the residual risk.
CAUTION
There is a risk of severe damage to the respiratory organs and
respiratory system - use protection of respiratory system, such as
KEMPER autoflow XP or a respiratory mask with FFP2 class filter
according to EN 149 standard.
Skin contact with welding smoke, etc. can result in irritation in
sensitive individuals - wear protective clothing.
Before welding, make sure that the filtration components are
complete and free of damage and that the device is in operation!
Only when green control indicator of the device button is lit,
exhaust of sufficient volume is provided to guarantee the
entrapment of the welding fumes.
Replacing the filter elements may result in skin contact with the
separated dust and the work may be associated with dust
swirling. Therefore, it is necessary to use respiratory protection
and protective clothing.
Clusters of burning coals in the filtration unit can lead to a
smouldering fire and release harmful/toxic fumes - switch off the
filtration unit, and extinguish it using the required fire
extinguishing means (e.g. fire extinguisher / extinguishing
blanket).
Secure the hazardous area and inform the responsible staff.
Dust can get into the surrounding environment when the filtration
unit contains leaks. Repair any leaks immediately and clean the
contaminated area; wear respiratory system protection and
protective clothing.
- 49 –
Technical changes and errors reserved.
KEMPER MiniFil Instruction Manual - EN