JUKI DLN-9010A Manual De Instrucciones página 12

Precautions to be taken so as to use the DLN-9010A more safely
1. To avoid electrical shock hazards, neither open the cover of the electrical box nor
touch the components mounted inside the electrical box.
1. To avoid personal injury, never operate the machine with any of the fi nger guard or
safety devices removed.
2. To prevent possible personal injuries caused by being caught in the machine, keep
your fi ngers, head and clothes away from the handwheel while the machine is in
operation.
In addition, place nothing around it.
3. To avoid personal injury, never put your hand under the needle when you turn "ON"
the power switch or operate the machine.
4. To avoid personal injury, never put your fi ngers into the thread take-up cover while
the machine is in operation.
5. The hook rotates at a high speed while the machine is in operation.
To prevent possible injury to hands, be sure to keep your hands away from the
vicinity of the hook during operation. In addition, be sure to turn OFF the power to the
machine when replacing the bobbin.
6. To avoid possible personal injuries, be careful not to allow your fi ngers in the machine
when tilting/raising the machine head.
7. To avoid possible accidents because of abrupt start of the machine, turn OFF the
power to the machine when tilting the machine head or performing replacement of
parts, adjustment of the machine, etc.
8. The motor does not produce noise while the machine is at rest.
To avoid possible accidents due to abrupt start of the machine, be sure to turn OFF
the power to the machine.
9. To avoid electrical shock hazards, never operate the sewing machine with the ground
wire for the power supply removed.
10. To prevent possible accidents because of electric shock or damaged electrical
component (s), turn OFF the power switch in prior to the connection / disconnection
of the power plug.
11. Be careful of handling this product so as not to pour water or oil, shock by dropping,
and the like since this product is a precision instrument.
12. When tilting or returning the sewing machine to the home position, hold the upper
side of the machine head with both hands and perform the work quietly so that fi ngers
or the like are not caught in the machine.
In addition, be aware that the safety devices such as the "eye protection cover" and "finger
guard" are sometimes omitted in the sketches, illustrations and fi gures included in the Instruction
Manual for the explanation's sake. In the practical use, never remove those safety devices.
CAUTION
xi