Reliance electric SP120 Manual De Instrucciones Y Operación página 34

English
3-4
Scrolling through parameter groups
This example shows you how to check a parameter value without changing the value
of the parameter. For this example, the operation of C21 [
verified.
Action
Press Up Arrow or Down Arrow to scroll through the
parameter groups, stopping at the C group.
Note: All of the d and F group parameters are
displayed in sequence, but the A, b, and C
parameters are grouped and the group must be
selected to view the parameters within that specified
group. Figure 3.1 details which parameters are in
each group.
Press PROGram to enter into the C group. C01
PROG
[
DIGITAL INPUT
Note: When parameter groups are entered, the
number of the parameter that was being viewed
when you last exited the group will be displayed.
Press Up Arrow to scroll through the parameters
contained within the group, continue pressing Up
Arrow until C21 [
Note: When viewing parameters within the A, b and
C groups the parameters will wrap from A01 through
C91 by pressing Up Arrow or Down Arrow. To view
parameters within the d and F groups, press SELect
until the display shows A - -, b - - or C- -. Once the
group letter is displayed, Up Arrow or Down Arrow
will scroll to the d and F parameters.
Press PROGram to view the parameter value stored
PROG
in C21 [
Press PROGram again to exit from the parameter
PROG
value back to the parameter number without
changing the stored value.
Press PROGram again to exit from the parameter
PROG
number to the parameter group display.
Description
1] should appear on the display.
DIGITAL OUTPUT
11].
DIGITAL OUTPUT
SP120 AC Drive Installation and Operation
11] is
DIGITAL OUTPUT
Display
11] is displayed.
C--
C01
C21
01
C21
C--