Reliance electric SP120 Manual De Instrucciones Y Operación página 58

English
Overoad capacity
Starting torque
Inherent Braking Torque
DC brake
Analog inputs
Digital inputs
Analog outputs
Digital outputs
Relay output
Protection functions
Other functions
Ambient temperature
Relative humidity
Vibration/Shock
Max. Installation altitude 1000 m (3300 ft) above sea level
Options
Standards
A-2
Software: 150% for 60 sec (once in 10 min); Hardware: 220%
minimum 100% or more (when torque boost has been set)
S12-201P4 ...204P0: 100%
S12-205P0 ...207P1: 70%
S12-20010 ...20015: 20%
(approximate; actual values depend on motor characteristics)
Starting frequency, braking torque, running times are variable
0 to 10 V, input impedance 10 k
4 to 20 mA, input impedance 250
PTC input
5 programmable level-triggered inputs, 24 V PNP logic, NO or NC contacts
1 programmable analog output, 0 to 10 V, 1 mA
Accuracy: +5% for frequency, + 20% or current
2 open collector outputs; 27 VDC, 50 mA
1 fault indication relay (change-over contact)
Resistive rating: 2.5 A at 250 VAC; 3 A at 30 VDC
Inductive rating: 0.2 A at 250 VAC; 0.7 A at 30 VDC
Overcurrent, overvoltage, undervoltage, electronic motor protection,
overtemperature, ground fault
15 preset speeds, PID control, unintentional start protection,
RS422 serial interface, skip frequencies
°
-10 to +40 C (up to +50
2 kHz, and derating output by 20%)
20 to 90% relative hmidity, no condensation
Vibration: 0.6 G operational / Shock: 10.0 G operational
Line filter modules
EN 61800-3 EMC guidelines in connection with optional line filter modules in line
with installation guidelines
EN 50178 Low Voltage guideline
UL508C CSA 22.2
® ®
O O
CE applies to 230 VAC and 460 VAC units.
Ω
Ω
°
C by removing top cover, reducing carrier frequency to
N223
(pending)
SP120 AC Drive Installation and Operation