Reliance electric SP120 Manual De Instrucciones Y Operación página 45

Parameter
Number
Second Acceleration/Deceleration Ramp
*A92 Accel Time 2
Time for the drive to ramp from 0.0 Hz to A04 [
FREQUENCY
determine when active.
This parameter can be changed while motor is running.
*A93 Decel Time 2
Sets the time for the drive to ramp from A04 [
FREQUENCY
used to determine when active.
This parameter can be changed while motor is running.
A94 Accel / Decel 2 Select
Used to determine when the A92 [
A93 [
DECEL TIME
Settings: 00=Digital inputs (C01-C05) set to 09{2CH}
01=Automatic if frequency programmed in
A95 Accel 2 Start Frequency
Sets the frequency at which A92 [
effect if A94 [
A96 Decel 2 Start Frequency
Sets the frequency at which A93 [
effect if A94 [
A97 Accel Curve
Selects the type of acceleration curve.
Settings: 00=Linear
01=S-curve
A98 Decel Curve
Selects the type of deceleration curve.
Settings: 00=Linear
01=S-curve
Parameters and Programming
Parameter Name/ Description
]. A94 [ / 2
ACCEL DECEL SELECT
] to 0.0 Hz. A94 [ /
ACCEL
ACCEL TIME
2] are used.
A95 [ 2
ACCEL START FREQUENCY
A96 [ 2
DECEL START FREQUENCY
ACCEL TIME
/ 2
ACCEL DECEL SELECT
DECEL TIME
/ 2
ACCEL DECEL SELECT
0.1 to 3000
MAXIMUM
] is used to
0.1 to 3000
MAXIMUM
2 ] is
DECEL SELECT
00 to 01
2] and
]/
] is reached.
0.0 to 360.0 0.1 Hz
2] will take
] is set to 01.
0.0 to 360.0 0.1 Hz
2] will take
] is set to 01.
00 to 01
00 to 01
Min./Max
Range Units
<1000, 0.1 s
>1000, 1 s
<1000, 0.1 s
>1000, 1 s
Numeric
Value
Numeric
Value
Numeric
Value
English
Factory
Default
15.0
15.0
00
30.0
30.0
00
00
3-15