Reliance electric SP120 Manual De Instrucciones Y Operación página 40

English
Parameter
Number
Analog input reference adjustment (continued)
A13 Analog Input Minimum
Sets the starting point (offset) for the analog input
range. Refer to diagram in A11 [
]
MINIMUM
A14 Analog Input Maximum
The ending point (offset) for the analog input range.
Refer to diagram in A11 [
A15 Analog Start Select
Sets the output frequency when frequency reference is
below value set in A13 [
Settings: 00 = A11 [
01 = 0 Hz
Frequency
A12
A15=00
A11
0V A13
4mA
A16 Analog Filter Select
Sets the level of the Analog input smoothing filter where:
1 = low (Bandwidth = 200 Hz)
8 = high (Bandwidth = 25 Hz).
Preset Frequencies
*A20 Internal Frequency
When A01 [
this parameter will provide the drives frequency
command. This parameter will change the frequency
command only after the new frequency is entered into
memory.
This value can also be changed via F01 [
] if no preset frequency inputs are active.
COMMAND
This parameter can be changed while motor is running.
3-10
Parameter Name/ Description
ANALOG FREQUENCY
ANALOG FREQUENCY MINIMUM
ANALOG INPUT MINIMUM
ANALOG FREQUENCY MINIMUM
% Input
Scale
A15=01
A14
10V
20mA
FREQUENCY COMMAND SELECT
Min./Max
Range
0 to 99
0 to 100
]
00 to 01
].
]
1 to 8
0.0 to 360.0 0.1 Hz
] is set to 02,
FREQUENCY
SP120 AC Drive Installation and Operation
Factory
Units Default
1% 0
1% 100
Numeric 01
Value
Numeric 8
Value
60.0