Use/Field Of Application; Explanation Of Warning Symbols - Ottobock C-Brace Instrucciones De Uso

security for beginners in particular. The swing phase can be triggered notwithstanding high
stance phase damping.
3 Application
3.1 Indications for use
The product is intended solely for orthotic fittings of the lower limbs.
3.2 Indications
• Unilateral or bilateral lower limb paresis or flaccid paralysis, e.g. due to polio, traumatic
paresis including paraplegia.
• Physical prerequisites such as muscle status, mobility grade and axis deviations that guaran­
tee proper control of the orthosis are crucial.
• The patient must fulfil the physical and mental requirements for the perception of audible sig­
nals.
Indications must be determined by the physician.
3.3 Qualification
3.3.1 Qualification of the orthopaedic technician
Fitting a patient with the product may only be carried out by orthopaedic technicians who have
been authorised by Ottobock after completion of a corresponding training course.
The adjustment software may only be used by users who have participated in the relevant product
training and have been certified for the application. Additional product training courses may
become necessary to qualify for software updates.
3.3.2 Qualifications of the therapist or nursing staff
The therapists or nursing staff must be trained in handling the product. Training must be carried
out by the authorised orthopaedic technician.

3.4 Use/Field of Application

The product is an orthopaedic device that makes everyday activities such as standing and walking
possible or easier for the user. If the activity level of the user increases in the course of use,
adjustments are required. Changes will also have to be made if the user's physical condition wor­
sens and more support from the product is needed.
Compliance with the daily duration of use and accompanying therapeutic measures is required.
In general, major discomfort should not be experienced when wearing the product. The affected
limb should be checked periodically for areas of excessive pressure. If excessive pressure is
observed, the orthopaedic technician should be seen as soon as possible.
4 Safety

4.1 Explanation of warning symbols

Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
37