Operating Manual X-zone Com - Maintenance and Care
9 M
AINTENANCE AND
9.1
FREQUENCY
X-zone Com: It is necessary to have this device inspected and serviced regularly by qualified techni-
cians.
Charger: The charger does not require any special maintenance. The manufacturer or a service tech-
nician authorised by the manufacturer should perform any service required on the charger.
9.2
CLEANING
Clean the device only with a moist cloth.
9.3
REMOVING THE BATTERY FOR REPAIR
Fig. 9.1: Opening the battery compartment.
Loosen the 6 screws on the
housing's underside.
To reassemble the X-zone Com, reverse the disassembly procedure. Tighten the screws so they are
hand-tight.
C
ARE
NOTE
Never use cleaning solutions that contain alcohol.
WARNING
Explosion hazard!
Do not open the battery compartment if it is in an ex atmos-
phere. The battery belongs to the device's certification and the
connecting and disconnecting of the battery should only take
place in an area that is not threatened by explosion.
CAUTION
Damage may occur!
If you open the housing, make sure to hold X-zone Com's up-
per section securely so that you don't drop the battery and the
upper section, causing damage to them.
Underside
Lift off the upper section.
Lift off upper section
Detach the battery plug, loosen the holder
and remove the battery.
Topside
Battery plug
connector
61