Hitecsa 105 Manual De Instrucciones De Uso, Mantención E Instalación página 14

EN
Menu parameters list "Set":
Menu parameters list "Set" 2-2
Menù
Par Label Description
label
Frequency activation heat treatment ACS (Legionella)
133 CYCA How often should the treatment be carried out legionella. If 0, the
function is disabled
134 SEtA Set point heat treatment DHW (legionnaires)
SAni
Period activation heat treatment (SWH antilegionnaires)
135 tiMA Minimum time continued, in which the temperature of the water in the
accumulation is maintained higher than the set point
136 HouA Orario attivazione trattamento termico ACS (antilegionella)
Activation mode of the heat generators:
0: Disabled additional generator
137 OPEr
1: When the additional generator activates, the heat pump turns off.
2: When the additional generator activates, the heat pump remains on.
Bivalence set point (additional generator):
EHS
138 SEtO External temperature at which the free contact can be activated. Heat
Source (clamps F-L)
Bivalence delay (additional generator):
139 dELt On-going time where the external temperature is below the Bivalence
set point, until the free contact activates. Heat Source (clamps F-L)
Management Pump 1
0: Management by code
PUMP 140 P1Mb
1: Management of Modbus
2: Management of the combined code and Modbus
Failure of the environment temperature probe KCTR (see paragraph
AMbt
10.2)
Failure of the environment humidity probe KCTR (see paragraph
AMbH
10.2)
Failure of the external temperature probe KCTR (see paragraph
OUtA
10.2)
Failure of the outlet water temperature probe KCTR (see paragraph
OUtU
10.2)
Signal error "Temp. Water Supply System" (clamps 3-4) see para-
InU
AL
graph 10.2)
Failure of the sanitary accumulation temperature probe KCTR (see
SAnt
paragraph 10.2)
Heat pump error. Error code on the PCB display (see paragraph
HP
10.3)
rEmC Remote controller connecting error (see paragraph 10.2)
Condensation risk for the radiant cooling system (see paragraph
CONd
10.2)
SUrr Overheating risk for the radiant heating system (see paragraph 10.2)
Section I :: User
U.m.
X=Parameter also available on KCTR
16
Range
Default KCTR
min max
day 0 30 0
°C 50 70 60
min 1 30 15
h:
00:00 23:59 02:00
min
- 0,1,2 0
° C -15 10 5
min 1 120 30
0 2 0
S = Password service (48)
PW Address
S 16405
S 16407
S 16407
S 16408
S 16409
S 16410
S 16411
S 16488
9004
9005
9006
9007
9008
9009
9010
9011
9013
9014