Plant Management System Integrated - Hitecsa 105 Manual De Instrucciones De Uso, Mantención E Instalación

EN Section I :: User
•

4. PLANT MANAGEMENT SYSTEM INTEGRATED

Description
The integrated management of the thermal system and of the heat pump happens by means of an innovative "USER INTERFACE" regulator integrated
therein. The User Interface is connected to the same management inputs of the heat pump and to a specific electric termination board "PCB-TERMINAT
BLOCK", where the various inputs and outputs of the parts constituting the plant can be connected. The particularity of the USER INTERFACE is made
of a parametric software enabling the customisation of residential comfort, based on the various requirements of rational use of the energy sources and
of the terminal units, for eco sustainability of the entire system. In addition to the normal controls on the mode and state of operation of the heat pump,
all parameters relating to the plant management algorithms can be set using the USER INTERFACE keys. To complete the functions present in the
USER INTERFACE, it is possible to connect the TERMINAL BLOCK with a KCTR user keyboard (optional accessory), that controls the temperature
and humidity of the main room in the home.
In addition to setting the room temperature and humidity by means of the KCTR, the user can also define the periods of attenuation of the environmen-
tal comfort. There is also the possibility of activating the main state and methods of operation of the heat pump and displays available on the USER
INTERFACE.
EXAMPLE OF THE SYSTEM WITH ADVANCE AND KCTR: heating with underfloor heating and cooling with fan coil
9