Graef Master 2720 Instrucciones De Servicio página 38

Table of content
1.0 Safety
1.1 Introduction
1.2 Safety instructions
1.3 Intended use
1.4.0 Sources of hazard
1.4.1 Sources of risk HS- / LS-Slide
1.4.2 Sources of risk EA-Slide
1.5 Work place
1.6 Authorised operator
1.7 Workwear
1.8 Behaviour in an emergency
1.9 Inspection of protective equipment
1.10 Protective equipment
2.0 Tecnical data
2.1 Machine overview
3.0 Transport and installation
3.1 Transport
3.2 Requirements on place of installation
3.3 Connection
3.4 Checking the machine
3.5 Check the direction of blade rotation
4.0 Slide
4.1.1 Disassembly of the slide
4.1.2 Installation of the slide
4.2.0 Basic slide Master 2720 / 3020 / 3310
4.3.0 Vario Slice Slide / VS slide
4.3.1 Tilting of the VS-Slide
4.3.2 Fastening holder for remainders
4.3.3 Attaching / detaching the VS-Slide
4.3.4 Bucher´s cutting insert for VS-Slide
4.4.0 Finely sliced-Slide / HS-Slide
4.4.1 Adjustment of HS-Slide
4.4.2 Insert product to be cut HS-Slide
4.5.0 Salmon slide / LS-Slide
4.5.1 Adjustment of LS-Slide
4.6.0 Double Slide / DS-Slide
5.6.1 Attaching / detaching of the inner tub of the DS-Slide
5.7.0 Clamping arm/ EA slide
5.7.1 Adjustment EA-Slide
5.0 Cutting operation
5.1 Before commissioning
5.2 Cutting operation
5.3 Cutting end pieces
5.4 Switching the machine off
38
40
44
46
47
53