Stihl Cutquik TS 700 Manual De Instrucciones página 11

English / USA
Closing the fuel cap
In order to reduce the risk of fuel spillage
and fire, properly tighten fuel filler cap by
hand as follows:
1 = Put the fuel cap in the fuel filler neck
opening.
2 = While gently pressing the cap down
on the fuel filling neck,
3 = turn the cap clockwise as far as it
will go (approx. one eighth-turn)
until it clicks.
10
Opening the fuel cap
1 = While pressing the cap down firmly,
2 = turn it counter-clockwise (approx.
one eighth-turn) until loose.
3 = Take the cap off.
!
Warning!
Never attempt to force the cap open by
using a tool. It may damage the cap and
allow fuel to leak.
Before use make sure that the fuel cap
has been properly tightened and any
spilled fuel wiped away. Check for fuel
leakage while refueling and during
operation. If a fuel leak is suspected, do
not start or run the engine until leak is
fixed and spilled fuel has been wiped
away.
TS 700