Tabla De Contenido - Stihl Cutquik TS 700 Manual De Instrucciones

Contents
Guide to Using this Manual .............. 2
Filler cap ........................................... 3
Safety Precautions ........................... 3
Assembling the bearing
and guard ....................................... 19
Tensioning the V-belt ...................... 21
Abrasive wheels ............................. 22
Fitting / replacing an
abrasive wheel ............................... 23
Fuel ................................................ 24
Fueling ............................................ 25
Starting / stopping the engine ......... 26
Operating Instructions .................... 28
Air filter system ............................... 29
Motor Management ........................ 30
Setting the carburetor ..................... 30
Spark arresting screen*
in the muffler ................................... 32
Checking the Spark Plug ................ 32
Replacing the starter rope
and rewind spring ........................... 33
Replacing the V-belt ....................... 35
STIHL cut-off machine cart* ........... 36
Storing the machine ........................ 36
Maintenance chart .......................... 37
Main parts of the machine .............. 38
Specifications ................................. 40
Maintenance and Repairs ............... 41
STIHL Incorporated
Federal Emission Control
Warranty Statement ........................ 42
* see "Guide to using this manual"
STIHl
TS 700
English / USA
Allow only persons who understand this
Manual to operate your cut-off machine.
To receive maximum performance and
satisfaction from your STIHL cut-off
machine, it is important that you read
and understand the maintenance and
safety precautions, starting on page 3,
before using your cut-off machine.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
Manual.
!
Warning!
Because a cut-off machine is a high-
speed cutting tool, some special safety
precautions must be observed as with
any other cut-off machine to reduce the
risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time-to-time. If the
operating characteristics or the
appearance of your cut-off machine
differs from those described in this
Manual, please contact your STIHL
dealer for information and assistance.
1