Replacing The Starter Rope And Rewind Spring - Stihl Cutquik TS 700 Manual De Instrucciones

To reduce the risk of fire and burn
injury, use only spark plugs
authorized by STIHL. Always press
spark plug boot (2) snugly onto
spark plug terminal (1) of the proper
size. (Note: If terminal has
detachable SAE adapter nut, it must
be attached.)
A loose connection between spark
plug boot and ignition wire
connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
TS 700
Replacing the starter rope
and rewind spring
1
Replacing the starter rope
:
Press the cable clip (1) together and
pull it out of the starter cover.
:
Remove the screws (2).
:
Remove the starter cover (3) from
the power unit.
English / USA
: Remove the spring clip (4)
: Remove the rope rotor with
washer (5) and pawl (6).
33