Stihl Cutquik TS 700 Manual De Instrucciones página 7

English / USA
Good footing is most
important in cut-off
machine work.
Wear sturdy boots with
nonslip soles. Steel-toed
safety boots are recommended.
!
Warning!
Loose objects may be thrown toward the
operator by the cutting tool.
To reduce the risk of injury
to your eyes never
operate a cut-off machine
unless wearing goggles or
properly fitted safety
glasses with adequate top
and side protection complying with
ANSI Z 87.1. Proper eye protection is a
must.
Wear an approved safety hard hat to
protect your head. Cut-off machine
noise may damage your hearing. Always
wear sound barriers (ear plugs or ear
mufflers) to help protect your hearing.
Regular users should have their hearing
checked regularly.
6
!
Warning!
When the inhalation of dust, mists and
fumes cannot be eliminated, the
operator should always wear a
respirator approved by NIOSH/MSHA
for the material being cut to reduce the
risk of serious or fatal respiratory illness.
For additional details and warnings on
this subject, see information under
"Working Conditions" in this Owner's
Manual.
THE CUT-OFF MACHINE
Parts of the cut-off machine, illustrations
and definitions of the parts see "Parts
and Control".
!
Warning!
Never modify a cut-off machine in any
way. Only attachments supplied by
STIHL or expressly approved by STIHL
for use with the specific STIHL cut-off
machine models are authorized.
Although certain unauthorized
attachments are useable with the STIHL
powerhead, their use may, in fact, be
extremely dangerous.
!
Warning!
Dust may collect on the powerhead,
especially around the carburetor, and
may absorb gasoline resulting in danger
of fire. Clean dust from the powerhead
regularly.
Abrasive Wheels
!
Warning!
Before mounting your cutting wheel,
make sure that the maximum operating
wheel speed is above or equal to the
spindle speed of your cut-off machine as
provided in the Specifications of this
manual. A wheel that is not so rated may
shatter or break and poses a threat of
serious or fatal injury to the operator.
Abrasive wheels for free-hand cutting
are subjected to particularly high
bending and compressive stresses.
!
Warning!
Unauthorized wheels may shatter or
break. Use only STIHL wheels or other
authorized wheels with approved RPM
ratings.
TS 700